Aeration blowers for wastewater treatment plants
Meeting tough WWTP requirements and more
Kaeser blower at a wastewater treatment plant in Moundsville, West Virginia
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. You can reduce life cycle costs of your equipment with components that offer:
- best possible equipment reliability
- simplicity and ease of maintenance
- superior isentropic efficiency and lower power consumption
- small footprint and ease of installation
- low-noise operation
- easy integration into SCADA control systems
To fulfill these needs and more, KAESER offers fully packaged blower systems (including rotary lobe, rotary screw, and turbo blowers) for applications including aeration, agitation, membrane scouring, filter backwashing, and bio-gas recovery. KAESER can also provide complete compressed air systems for controls, instrumentation, and shop air. A wide range of portable compressors for site work and movable backup is also available.
In addition to excellent performance and high-quality equipment, KAESER offers comprehensive design, installation support, a 24-hour emergency parts delivery guarantee, maintenance and repair services, and other system services.
Want more information?
Fill out the form below to find out how we can help you solve your system challenges.
Fields denoted with an asterisk (*) below are required.
Custom solutions for wastewater
Reduce engineering and installation costs with a custom engineered blower room, built to specification for the most demanding and challenging installations. These complete systems are designed for exceptional reliability, simple maintenance, and superior energy efficiency no matter what the installation limitations may be. They eliminate space, weather, and accessibility constraints and can significantly reduce construction, installation and operating costs.
Blower system for sludge tank aeration
This custom engineered solution is one of two all-weather, turnkey blower systems for a wastewater treatment facility in rural Kansas. It is 34 feet long, 11 feet wide, (11.7 feet with louvers) and 10.5 feet tall. It was transported and installed as a complete system requiring minimal site preparation. Due to the remote location, this solution was faster and easier to commission than building a blower room, and created cost savings for both the contractor and the operator.
This rotary lobe blower system will be used for occasionally aerating two sludge holding tanks. The tanks vary in depth so the blowers are hard-wired to a 4-20mA speed signal that allows them to adjust with tank depth and/or oxygen level. Each blower is sized to meet the needs of one sludge tank, with the third blower available as back-up for either of the other two.
Take a tour of this system below: